MIK-LDG Sanitary electromagnetic flowmeter for food processing

MIK-LDG Sanitary electromagnetic flowmeter for food processing Featured Image
Loading...
  • MIK-LDG Sanitary electromagnetic flowmeter for food processing
  • MIK-LDG Sanitary electromagnetic flowmeter for food processing
  • MIK-LDG Sanitary electromagnetic flowmeter for food processing
  • MIK-LDG Sanitary electromagnetic flowmeter for food processing

Short Description:

SUP-LDG Sanitary electromagnetic flowmeter is made of stainless steel, which is widely used in water supply, waterworks, food processing, etc. It supports pulse, 4-20mA or RS485 communication signal output.

Features

  • Accuracy:±0.5%(Flow speed > 1m/s)
  • Reliably:0.15%
  • Electric conductivity: Water: Min. 20μS/cm

Other liquid:Min.5μS/cm

  • Flange:ANSI/JIS/DIN DN15…1000
  • Ingress protection:IP65

Tel.: +86 15867127446 (WhatApp)Email : info@Sinomeasure.com


Product Detail

Product Tags

  • Specification
 Product  Sanitary type electromagnetic flowmeter
 Model  SUP-LDGS
 Diameter nominal  DN15~DN1000
 Nominal pressure  0.6~4.0MPa
 Accuracy  ±0.5%,±2mm/s(flowrate<1m/s)
 Repetitiveness  0.2%
 Liner material  PFA, F46, Neoprene, PTFE, FEP
 Electrode material  Stainless steel SUS316, Hastelloy C, Titanium,
 Tantalum, Platinum-iridium
 Medium temperature  Integral type: -10℃~80℃
 Split type: -25℃~180℃
 Ambient temperature  -10℃~55℃
 Power supply  100-240VAC,50/60Hz / 22VDC—26VDC
 Electrical conductivity  Water 20μS/cm other medium 5μS/cm
 Ingress protection  IP65, IP68(optional)
 Product standard  JB/T 9248-2015

 

  • Measuring principle

The working principle of the electromagnetic flowmeter is based on Faraday’s law, which measures conductive media with a conductivity greater than 5μs/cm and a flow range of 0.2 to 15 m/s. An electromagnetic flow meter is a volume flow meter used to measure the flow rate of liquid through a pipeline.

The measurement principle of a magnetic flowmeter can be described as: when a liquid passes through a pipe with a diameter of D at a flow rate of v, the magnetic flux density generated by the excitation coil is B, and the following electromotive force E is proportional to the flow rate v:

Where:
E-Induced electromotive force
K-Meter constant
B-Magnetic induction density
V-Average flow speed in cross-section of measuring tube
D-Inner diameter of measuring tube

  • Introduction

SUP-LDGS sanitary electromagnetic flowmeter is applicable for all food grade conductive liquids measure, such as drinking water, food processing, pharmaceutical industry and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer.

Noted: the product strictly prohibited to be used in explosion-proof occasions.


  • Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as: Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

  • Automatic calibration line


  • Previous:
  • Next:

  • Write your message here and send it to us
    TOP